Manufactured in Hamilton, Ontario since 1933

Brush Grommets for Raised Floor Cable Cut-Outs

Close the cable cut-out and keep the cables moving through it.

  • Three sizes, with a 100, 200, or 300 mm brush field
  • Installs before or after the cables are laid
  • UL94 V-0 manufacturer’s certificate

Request a quote See the sizes

Prefer email? Send your drawing or a photo of the opening to sales@feltonbrushes.com.

Brush grommet sealing a cable cut-out in a raised floor

A cable cut-out in a raised floor tile is an open path for cold air. A brush grommet frames the cut-out and closes it with two brush segments that part around the cables and close again behind them. It is one of the data center brush seals Felton supplies for raised floors, cabinets, and aisle containment.

Sizes

Brush grommet, three-quarter view, 100 mm brush field

100 mm brush field

Frame, overall (measured)
170 × 290 mm (6.69 × 11.42 in)
Frame height (measured)
33 mm (1.30 in)
Cut-out, along the brush field
134 mm (5.28 in)
Request a quote for this size
Brush grommet, three-quarter view, 200 mm brush field

200 mm brush field

Frame, overall (measured)
270 × 290 mm (10.63 × 11.42 in)
Frame height (measured)
33 mm (1.30 in)
Cut-out, along the brush field
234 mm (9.21 in)
Request a quote for this size
Brush grommet, three-quarter view, 300 mm brush field

300 mm brush field

Frame, overall (measured)
370 × 290 mm (14.57 × 11.42 in)
Frame height (measured)
33 mm (1.30 in)
Cut-out, along the brush field
334 mm (13.15 in)
Request a quote for this size

The frame flange sits about 4 mm (0.17 in) above the floor surface. The body drops about 29 mm (1.14 in) into the cut-out. (Measured.)

See all sizes in one table
SizeBrush fieldFrame, overall (measured)Frame height (measured)Cut-out, along the brush field
100100 mm (3.94 in)170 × 290 mm (6.69 × 11.42 in)33 mm (1.30 in)134 mm (5.28 in)
200200 mm (7.87 in)270 × 290 mm (10.63 × 11.42 in)33 mm (1.30 in)234 mm (9.21 in)
300300 mm (11.81 in)370 × 290 mm (14.57 × 11.42 in)33 mm (1.30 in)334 mm (13.15 in)

New build or retrofit

New build

Fit the brush grommet into the cut-out before the cables are run. Cables then feed through the brush as each cabinet is connected.

Retrofit

The brush grommet can also be installed after the cables are laid, so an open cut-out in a working floor can be sealed without pulling the cables.

How a brush grommet works

The grommet is a rigid frame that drops into a rectangular cut-out. Two brush segments face each other across the opening and meet in the middle. Each segment has two layers of fibres, one above the other. Cables push through where the segments meet, and the fibres close around them. (Measured.)

The frame is made in two halves and fastens with screws. It can be installed before or after the cables are laid.

Brush grommet, top view, 200 mm brush field

Specifications

  • UL94 V-0, manufacturer’s certificate
  • Anodized aluminum and black ABS frame
  • Pack of 10

The brush grommet carries a UL94 V-0 certificate from the manufacturer.

FrameAnodized aluminum and black ABS
FibreBlack PVC, smooth, 0.30 mm and 0.40 mm (0.012 in and 0.016 in) diameter
Brush layoutTwo double-row brush segments, offset
Flame ratingUL94 V-0, manufacturer’s certificate
Air leakage at 10 Pa (0.04 in. w.c.)50 m³/h (29 CFM) without cable and 72 m³/h (42 CFM) with cable, from the manufacturer’s testing
MountingScrew fitting
Pack10 pieces

Send us your tile drawing and the number of cut-outs.

Request a quote

Where brush grommets are used

  • Cable cut-outs in raised floor tiles under cabinets and at the end of rows
  • Cable management in enclosures
Brush grommet set into a raised floor tile

Frequently asked questions

What sizes do brush grommets come in?

Three. The brush field is 100, 200, or 300 mm wide, and all three frames are 290 mm long.

Can a brush grommet be fitted to a raised floor that is already in use?

Yes. It can be installed before or after the cables are laid.

What cut-out does a brush grommet need?

The cut-out along the brush field is 134 mm, 234 mm, or 334 mm, depending on the size. Send us your tile drawing and we will confirm the full cut-out.

Can a brush grommet be made to a custom size?

Custom sizes are possible. Send us the cut-out dimensions. Where a framed grommet does not suit the opening, a metal-back strip brush or a flexible strip brush can be cut to fit.

Request a quote

  1. The cut-out size, or the size of grommet you need
  2. How many cut-outs per room or per project
  3. Whether cables are already in place
  4. Any flame rating your specification calls for

Prefer email? Send your drawing or a photo of the opening to sales@feltonbrushes.com.

    Size

    Flexible strip brush, push-on, 8 mm body

    Flexible Strip Brushes

    A brush set in a flexible body. It pushes onto a sheet metal edge or screws to a frame, and it cuts to length on site.

    Metal-back strip brush

    Metal-Back Strip Brushes

    A strip brush made to your length, trim, and fill. Use the configurator to build a spec in 3D.

    Contained data center aisle with roof panels, end doors, and rows of server cabinets

    All Data Center Brush Seals

    Brush seals for hot and cold aisle containment and raised floors.

    Request a quote